What's the Best Hot Tub

Author Topic: newbie getting started  (Read 13635 times)

ridger

  • Junior Member
  • *
  • Posts: 28
Re: newbie getting started
« Reply #15 on: October 25, 2017, 08:20:24 am »

Hot Tub Forum

Re: newbie getting started
« Reply #15 on: October 25, 2017, 08:20:24 am »

ridger

  • Junior Member
  • *
  • Posts: 28
Re: newbie getting started
« Reply #16 on: October 25, 2017, 04:25:59 pm »

Cora5

  • Junior Member
  • *
  • Posts: 62
Re: newbie getting started
« Reply #17 on: October 25, 2017, 08:33:25 pm »
Hi Ridger, I like your setup there. I plan on doing something similar to this. What is that sticking up out of the concrete pad?

Hottubguy

  • Ultimate Member
  • *****
  • Posts: 2150
Re: newbie getting started
« Reply #18 on: October 25, 2017, 08:38:15 pm »
Cool setup. Cora that looks like electrical conduit to pull wires through

ridger

  • Junior Member
  • *
  • Posts: 28
Re: newbie getting started
« Reply #19 on: October 26, 2017, 09:15:34 am »
Thanks guys.  Yes Cora, Hottubguy is correct.   It is the conduit pipe for the wiring.  They are hoping to do the acid stain on the concrete today, so I'm excited to see how that comes out.  Hope to post more pictures soon.

ridger

  • Junior Member
  • *
  • Posts: 28
Re: newbie getting started
« Reply #20 on: October 27, 2017, 02:02:03 pm »
Concrete was stained today.  Now if I can just keep falling leaves off it while it dries.


wmccall

  • Global Moderator
  • Mentor Level Member
  • *****
  • Posts: 7431
    • https://www.facebook.com/BillMcCall1959/
Re: newbie getting started
« Reply #21 on: October 27, 2017, 04:18:55 pm »
Thanks for all the pictures, can't wait to see the rest.
Member since 2003.  Owner Dynasty Excalibur 2003-2012.   Sundance Majesta from 2012-current

ridger

  • Junior Member
  • *
  • Posts: 28
Re: newbie getting started
« Reply #22 on: October 31, 2017, 05:40:26 pm »
Glad you guys are enjoying the photos.  Hot tub is suppose to be here in two days.  Of course electrician says he can't get here until tomorrow.  So sure hope he does, in order for the hot tub guys to wire me into power and get it filled up.  The landscaping is still ongoing.


ridger

  • Junior Member
  • *
  • Posts: 28
Re: newbie getting started
« Reply #23 on: November 01, 2017, 05:46:17 pm »
Dear Diary,
Nothing like last minute wiring before hot tub is scheduled to arrive tomorrow morning.  But Houston, we may have a problem.  Rain.  Causing a delay on gravel spreading that was going to offer drive-up drop-off access.  So now I'm waiting to hear if a Jacuzzi J-480 can be maneuvered along a ten foot wide porch in order to reach the connected concrete pad.  I'm sure some of you already know the answer to this question, and I should be finding it out pretty soon myself.



ridger

  • Junior Member
  • *
  • Posts: 28
Re: newbie getting started
« Reply #24 on: November 02, 2017, 02:27:20 pm »
It has arrived.


ridger

  • Junior Member
  • *
  • Posts: 28
Re: newbie getting started
« Reply #25 on: November 02, 2017, 02:28:31 pm »
On the pad.


ridger

  • Junior Member
  • *
  • Posts: 28
Re: newbie getting started
« Reply #26 on: November 02, 2017, 02:29:49 pm »
Water going in.


ridger

  • Junior Member
  • *
  • Posts: 28
Re: newbie getting started
« Reply #27 on: November 02, 2017, 04:50:15 pm »
Heating up for the first time.


ridger

  • Junior Member
  • *
  • Posts: 28
Re: newbie getting started
« Reply #28 on: November 02, 2017, 04:51:08 pm »

ridger

  • Junior Member
  • *
  • Posts: 28
Re: newbie getting started
« Reply #29 on: November 03, 2017, 07:51:00 am »
We were going to try to bring it across the porch and up the steps, but the bobcat driver saved us by laying a track of gravel across the muddy area.  This allowed us to roll it down onto the concrete pad.

On my Spa delivery agreement electrical requirements, it called for 3 wires plus a ground wire, for a total of 4 wires, all #6 wire.

What it did NOT say was these four wires had to be in a three foot section of flexible conduit with a female plug adapter, if you want the Jacuzzi techs to get you wired up and running.  SO, I had to break the speed limit running into town for these two items.  It might be a good idea for future buyers to ask maintenance techs some extra questions on wiring requirements that aren't written down in your delivery agreement.
« Last Edit: November 03, 2017, 07:52:52 am by ridger »

Hot Tub Forum

Re: newbie getting started
« Reply #29 on: November 03, 2017, 07:51:00 am »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42