Brand Specific Forums > Jacuzzi Hot Tubs

2004 Jacuzzi J-335 - FL1 Error

<< < (3/3)

fantom:
I could have the voltmeter on the wrong setting..what should it be on?

Jacuzzi Jim:
Chit I can't remeber,  you cna open up your gfci out by the spa assuming you have one.   The power coming into that box should be 220.   Put the two leads on that and spin the setting till you get a 220v reading.   It should be the one you have it on if you got a 110v reading. 

fantom:
i assume you mean the disconnect box. Ok I touched red voltmeter connection to red wire while black voltmeter connection was on the black wire. Didn't get a reading.  Could the transformer be bad? Also, thats a tight spot where the circ pump is. Do I have to remove the control box to replace the circ. pump?

Navigation

[0] Message Index

[*] Previous page