Brand Specific Forums > Jacuzzi Hot Tubs

2004 Jacuzzi J-335 - FL1 Error

<< < (2/3) > >>

Jacuzzi Jim:
 Thats a main pump, circ pump is located behind the metal control box.  Small and black with a 3/4" hose running into it. 

fantom:
Jim,

I checked the connection at the black wire end where the connector connects to the circuit board with the neg (black) voltmeter  and the white wire end where the connector connects to the circuit board with the pos. (red) voltmeter and switched the voltmeter to DCV 200v and the reading is fluctuating around 120volts. So if I did this correctly I believe I an getting power. Please advise.

Jacuzzi Jim:
 You should have 110v per leg. 110v white 110v black Touch them both for a total 220v.  It sounds like you have a bad circ pump. 

fantom:
I was touching them both simultaneously.  Red voltmeter connection to white wire while black voltmeter connection was on the black wire.

Jacuzzi Jim:
 And you only had a 110 with the two of them?      99.999% sure it's a 220v pump.  You need to check the power coming into the spa.    And follow it from there.   

Navigation

[0] Message Index

[#] Next page

[*] Previous page