Brand Specific Forums > Marquis Hot Tubs

Marquis Euphoria Troubleshooting HELP

<< < (2/2)

Jacuzzi Jim:

--- Quote from: Budule on July 30, 2014, 08:58:15 pm ---Somebody else here had the same thing going on I believe , they  ( company ) didn't want to dig the foam out and tried to get him to "live with it "  but he insisted......turned out to be a kinked line.......

--- End quote ---

  This but it would have been like that from the start not all of a sudden, least one would think.    Not mentioned and you may have done it already?  But try removing the filter.  Marquis spa's don't have circ pumps so it's possible you have a clogged filter restricting flow worth a try anyway.. 

Canada:
I have cleaned all filters but still no changes.

Do you know if a hot tub water pressure meter exists on the market that can measure the pressure coming from the jets?  This would be able to prove to the dealer that a problem does exist.

Thanks.

MarKee:
Have you tried running it without the filters?  Sometimes filters can look clean but can have body oils soaked in to them, and can limit flow.

If your spa has any exposure to leaves or other debris,
I have seen leaves get sucked in after changing filters or cleaning filters  in rare occurrences. The pump will still function, but will have significantly less flow. If you suspect this, you will want to loosen the pump union and inspect the pump impeller on the pump that powers the side of the spa that you are having trouble with.

Also, keep in mind the pump that is running the water features will be approximately 10% less powerful than the other pump if the water feature is cranked on full blast.

meriflower:
Hi we had this happen to our Marquis Epic.  It didn't start out that way it happened about a year or so owning it.  Dealer was out many times, checked filters, checked equipment lines (that they could get to) ensured the valves were all open, tried running it without the filters, replaced #1 pump/motor.  It was in our garage so no leaves or debris of that nature.  Looking for a kinked line somewhere in the foam was the only thing that we didn't do.  They never figured it out and we just lived with it until we got a new spa (not Marquis).

Navigation

[0] Message Index

[*] Previous page