General > Beating a dead horse

Filtration in hot tubs

<< < (9/30) > >>

Gomboman:
I hate to bring this up since it will probably go to the Dead Horse section anyway. Why is HS the only manufacturer to use No-Bypass? I'm not saying it's better or worse. Does HS hold Intellectual Property on this design? I would think at least one other company would grab on to it if it had merit.  ???

salesdvl:

--- Quote ---I fixed my post for you salesdvl. ;)

--- End quote ---


;)   ;D

salesdvl:

--- Quote ---I bet they have done some reliability analysis and are pretty sure of the 10 year life.
--- End quote ---


I'm sure they did, but there is only so much you can do to "accellerate" testing.  

MarKee:
Vortex filtration:  Pulling water from 360 degrees around the filter, allowing the filter to be more effective.  If you look at a Marquis filter the whole thing will be dirty, not just a 5" segment common to spas that use wall filtration.  The vortex skimmers allow all Marquis Spas to have 4 corner seating as well.  

Cola:
Not part of my original point but the vortex draw from the surface, not just one or two inches below.  I have never yet had a scum line on my tub - at all.
Steve

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version