Hot Tub Forum
Original => Hot Tub Forum => Topic started by: bosco0633 on January 26, 2007, 07:57:04 pm
-
Ok, so last week we had freezing rain and it sucked! It was so heavy that I needed help lifting it. Then in the morning I had to scrape some ice off but couldnt get it all off. Why is it so heavy most of the stuff is off the top but it still ways a ton.
Is it normal for some water to get inside the cover or should it be dry? If so would that freeze a bit and cause this or is it just whats on top causing this. My cover is only a year and 1/2 old.
-
When We're expecting snow or ice. I cover the spa with a tarp. Makes the cover easy to clean off. Just remove the tarp. I have a large eye-hook in my deck at each corner of the spa and hold it on with bungee cords.
-
I asked a similar question to Doc on his board and he told me it probably is the water accumilating from the 1,000's of thread holes in the cover.
I have noticed myself that my cover gets heavy after a couple of days of rain. I was thinking water absorbtion in the cover vinyl. The first time it happened I started thinking - man my cover is only about 1 1/2 years old, I really don't want to buy another one ... A couple of days later it was fine!
-
Exactly, Vinny. I always notice water under the vinyl after a rain. It takes a few minutes after opening for it to drain out. That's why it is so important to have the cores wrapped and sealed well under the vinyl.
-
well, today was a little better outside, so I went out and worked on the tub. I figured out why the cover was so heavy. ICE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I bet you, that I had atleast 200lbs. The ice was so thick, 3/4" to be exact! I guess when it snowed, over top, I just assumed that it was all snow. It was some serious work getting it off but the cover is back to regular
-
You crazy cold climate people and your crazy cold problems! Glad that your cover is still in good shape.