Hot Tub Forum

General => General info Somewhat hot tub related => Topic started by: Johnny D on May 24, 2007, 10:28:28 am

Title: Routing Electical in Sundance Maxxus
Post by: Johnny D on May 24, 2007, 10:28:28 am

Planning on getting a Maxxus and noticed that the electrical is designed to enter thfrom the outside on either of the front two corners.  I'd like to come up from underneath and stub up a piece of conduit when I plan the pad install to eliminate seeing it.  

Any problem coming up from underneath that I should be aware of?Thanks in advance.
jd

Title: Re: Routing Electical in Sundance Maxxus
Post by: cburk0677 on May 24, 2007, 11:29:46 am

This needs to be moved to the main forum as it is 100% hottub related.

Title: Re: Routing Electical in Sundance Maxxus
Post by: SerjicalStrike on May 24, 2007, 12:32:52 pm

As long as you open up the Maxxus you are going to get and do the correct measurements, there are no issues with coming up through the bottom.  

Title: Re: Routing Electical in Sundance Maxxus
Post by: Campsalot on May 24, 2007, 11:13:13 pm

 have a Maxxus and also came up from the bottom.  I came right through the bottom frame member on the right hand side.  No probs and worked great!

Title: Re: Routing Electical in Sundance Maxxus
Post by: Johnny D on May 25, 2007, 12:13:58 am

Thanks, Will have to stop by the dealer and see exactly so I know where to stup it up before I set up the patio.  On the other hand having it come up the side has its advantages.  
Thanks for responding