Hot Tub Forum
Original => Hot Tub Forum => Topic started by: seamoe on July 24, 2006, 09:47:02 pm
-
I've been reading a few posts and have a question about my Geneve. I saw Autoplay posted a reply about a heatsink issue. What exactly is that? My lights are out of sync on my spa. I felt my control buttons, and the only thing that's hot is the LED temp display, the rest of it is "warm". Do I have a problem? Obviously I do with the lighting, but is something else wrong? and if so do I need to worry about it if I dont get it fixed right away.
-
A heatsink transfers heat from something hot,and helps dissipate it. The LED lights in your spa and mine utilize 1 of those. It sounds like yours is defective,esp if your lights are out of synch.
The LED control button shouldn't be "hot". It should be slightly warm,and that's it.
As far as a safety hazard,I wouldn't sweat it as far as rushing to get it fixed etc. I would let your dealer know about your problem,and schedule a repair. Tell him/her to bring out what's needed to repair/replace the heatsink issue and the spaglo lighting being out of synch.
I would rush it if,your warranty is close to expired. I don't recall what the warranty is as far as the spaglo.