Hot Tub Forum

Original => Hot Tub Forum => Topic started by: jojo on August 09, 2000, 01:34:08 am

Title: Phoenix Spas
Post by: jojo on August 09, 2000, 01:34:08 am
Anyone ever heard of this spa!!
Tell me about this one! :)

Jojo
Title: Phoenix Spas
Post by: Spa Tech on August 09, 2000, 11:38:14 pm

The Phoenix "factory is about 10 miles away from my home.

Their products in general have the following features;

The shells are made of Quarite or a look-a-like product backed by hand-applied fiberglass. None of the shells I've seen are 'lip-over' cabinet.

The spas arent fully insulated. The typical Phoenix is 1/3 foamed with 2# density foam. Additional insulation is available but discouraged and is added only at a significant additional cost.

Ive been told by a factory representative that they can make a 110v model at extra expense, but this too is discouraged. 220v is about all they sell.

The controls arent assembled on-site but are supplied by Balboa Controls.

A 350 gallon model of theirs I looked at still only has a 50 Sqft filter. To be adequate, it really should be closer to 90 Sqft.

Cabinet materials I've seen have varied from low grade redwood to house siding. As I mentioned above, the shell is seated on top of the cabinet frame as opposed to rolling the lip over the top of the cabinet.

Some models are equipped with CD players, TV's, and VCR's. Early on there were some significant problems with condensation on the interior of the TV faceplate and there were some issues in basic operation of the CD players. Sound quality from the exterior speakers continues to be poor.{I shopped them at the most recent home and garden show.}I have no recent news on whether these problems have been adequately rectified.

Overall the product remains a scad under average. They have concentrated on offering more and more choices [They have 28 different models and about 15 colors] while ingoring some basic spa design fundamentals.
Title: Re:Phoenix Spas
Post by: jojo on August 10, 2000, 09:47:18 pm
Isnt this the same spa Jim sells on the spaspecialist site?
I was told that they make them for Jim, however they are customized for him?
jojo
Title: Re:Phoenix Spas Tech is "right on"
Post by: SpaSalesMan on August 10, 2000, 10:59:41 pm
Good post tech, this spa is average at best!! nobody who is not on the internet and stumbles onto the haven site by accident, has ever even heard of this brand.
Title: Re:Re:Phoenix Spas
Post by: SpaSalesMan on August 10, 2000, 11:47:44 pm
JOJO- If you want garbage come to my home on tuesday morning!! or yes, buy from there.  There is not a registered manufacturer by the Haven name with the NSPI.
Title: Re: Phoenix Spas
Post by: tanstaafl2 on April 22, 2006, 10:12:09 pm
Seems a bit odd but all the earlier posts are from 5 years ago. How did they resurface?
Title: Re: Phoenix Spas
Post by: Dr. Spa™ Ret. on April 22, 2006, 11:18:10 pm
No, but you did respond to posts that are 5-1/2 years old and possibly not relevant today.

Quote
so I guess I responded to a bunch of people who aren't around anymore