Hot Tub Forum
Original => Hot Tub Forum => Topic started by: anne on March 24, 2006, 03:24:50 pm
-
If a tub had bromine as a sanitizer, and you drain, refill and go to chlorine, does it matter if there was a little water left in the plumbing that had Br? How much residual water stays behind, and how do you remove it? Or do you have to?
-
It should not matter. You should be fine.
-
you're fine.
-
I would try to get out more water than a regular water change - for example I would get a wet vac or use a big sponge and bucket.
But if you get all you can, you should be just fine.
-
the spa itself is beautifully clean. Leaves that found their way in during the move, and a little rain water and dirt have been sponged and wiped out. I assume there is still water I "cannot see" (in plumbing), but I'll not worry about it, as you said!
Filling and electrification ;D to occur tomorrow. The weather has not been my friend, but I did lay flagstone in the rain!!!!!
-
Filling and electrification ;D to occur tomorrow.
just make sure it's not electrocution!
Congrats!!