Hot Tub Forum
Original => Hot Tub Forum => Topic started by: Vinny on January 14, 2006, 11:33:32 am
-
... Why is that I am the only one with weird problems?
Anyway, I went into the tub last night, got out at about 8:30, put in 1 teaspoon (1.5 PPM) and shut the lid.
Was doing my Sat morning ritual of checking and shocking the water at 10:30. PH 7.2 - GREAT!! Chlorine 3PPM - WHAT!!!. Tested it again - the same. Seeing 3 PPM makes me think that I put 2 teaspoons into the tub. But after 12 hours, I should have close to 0 chlorine. I usually check my combined chlorine when my free chlorine is 0 to accurately see how much it is.
My Taylor kit is new, I just recieved it from Doc maybe 2 months ago.
I guess my tub is now starting to pay for itself by generating chlorine - who woulda thought! ??? ;D
Any ideas?
Vinny
-
Did you test before or after you added the shock? And, how much of what type of shock did you add?
-
I tested before shocking and I used MPS.
I guessing that I put a lot more than I thought! I truely don't remembering putting all that chlorine into the tub. I can't see a problem with the Taylor kit, I use it on a weekly basis. Tub is at 102 - 103, so the chlorine has to disipate due to the heat ... unless it's those foam covers you sell Doc, it keeps the chlorine from off gassing!
It's got to be me! First went the looks and now the brains ... Life is Grand!
-
IIt's got to be me! First went the looks and now the brains ... Life is Grand!
...uhhh oh.....whats next......... :o........little blue pills......hang in there Vinny..... ;)