Hot Tub Forum

Original => Hot Tub Forum => Topic started by: lbnaz on October 21, 2005, 09:38:29 am

Title: Hot Springs Vista diverter valves
Post by: lbnaz on October 21, 2005, 09:38:29 am

 Hi all,
Been lurking here for a while now, learned alot. I have a question concerning the position of the Diverter valves on my Spa. I have a 2005 Hot Springs Vista.
My manual says to use either the 3 or 6 O'clock position to switch between series of jets. Frequently my wife and or kids will change the position somewhere in between, does this hurt anything? Being able to vary the position also varies the amount of flow being put out to each series of jets but, I don't know if its ok to do this. What say the Experts?

Title: Re: Hot Springs Vista diverter valves
Post by: JcDenton on October 21, 2005, 09:40:42 am

If you can reach it and turn it while your sitting in it, it ain't going to hurt anything - that's why it was put there.

Actually, the best part is playing with all the new knobs and settings to find out exactly how you like it best!

Enjoy

Jc

Title: Re: Hot Springs Vista diverter valves
Post by: tonyp on October 21, 2005, 10:16:43 am

We almost always keep our HS Envoy diverters in the 6 o'clock position.  We find that this give us more than enough power to all the jets.  We only use 3 or 9 when we really need to get blasted.

Title: Re: Hot Springs Vista diverter valves
Post by: East_TX_Spa on October 21, 2005, 10:23:04 am

It'll be fine.  Spin 'em to your heart's content.

Terminator

Title: Re: Hot Springs Vista diverter valves
Post by: lbnaz on October 21, 2005, 10:52:20 pm

Thanks, for the replys, going out to play with different combinations

Title: Re: Hot Springs Vista diverter valves
Post by: Danny on October 25, 2005, 12:39:54 pm

Thanks from another new guy with the same question.  You guys are great!