Hot Tub Forum

Original => Hot Tub Forum => Topic started by: kufferaths on January 22, 2005, 09:41:25 pm

Title: Display is blank
Post by: kufferaths on January 22, 2005, 09:41:25 pm

I drained my tub on friday, cleaned it today and refilled.  Turned power back on and ran both pumps on high for 30 minutes.  The display was reading fine when I first turned on pumps but when I went back out after 30 minutes the power was still on but the display was blank.  So i turned the power back off and on again and the display is back up again.  Why did this happen?  Can anyone tell me?  Four months ago I drained and refilled, started it back up and it ran for about 20 minutes and then tripped the braker. I flipped the braker back on and it tripped again 15 minutes later. I reset it again and it was fine until today.  Please help.

Title: Re: Display is blank
Post by: wmccall on January 23, 2005, 09:40:08 am

What brand of tub?, someone might recognize a familiar pattern

Title: Re: Display is blank
Post by: kufferaths on January 24, 2005, 01:55:24 am

It's a Chairman II by Deminsion one.  It's been running fine for the last 24 hours, I just was wondering why it happened in the first place.

Title: Re: Display is blank
Post by: Brewman on January 24, 2005, 08:44:39 am

Have you discussed this with the service department at your dealer?  They might know from experience with other spas.
Brewman