Hot Tub Forum

Original => Hot Tub Forum => Topic started by: xyourobob on March 30, 2018, 10:57:20 am

Title: Both lights blinking on Hot Spring Prodigy
Post by: xyourobob on March 30, 2018, 10:57:20 am

I replaced the circulation pump and now I have circulation but the red and green lights still flash. When I turn on the hot tub the the heater light on the main board lights up of for a millisecond and then goes out, a minute later the panel lights flash.

I jumped the wires to the pressure switch connection on the main board and I have the same results.

This is the 3rd time this has happened...... I checked the voltage at the outlet and it reads 122.6 volts

Could it be another faulty board?

Title: Re: Both lights blinking on Hot Spring Prodigy
Post by: Spiderman on April 01, 2018, 12:02:22 pm

How old is your heater?

Title: Re: Both lights blinking on Hot Spring Prodigy
Post by: xyourobob on April 03, 2018, 09:08:32 am

I replaced the heater about 6 or 7 years ago.