Hot Tub Forum

Brand Specific Forums => Jacuzzi Hot Tubs => Topic started by: Damo on January 14, 2017, 05:22:06 pm

Title: Jacuzzi fl1 error
Post by: Damo on January 14, 2017, 05:22:06 pm

I've had a fl1 error flashing for a couple of months but with no other symptoms. I think it is a j350 or 345. Year 2007 or 2008.

Today I emptied and refilled the tub and found the heater will not kick in. The filters are almost new. (Although not Jacuzzi branded.) I did remove them and restart but no change.

All jets are working normally. I tried to feel the filter connection for suction as described elsewhere but couldn't feel much. That said, I'm in Scotland in January and with the water at 7.2 Celsius I didn't fancy fumbling in the water too long! ☺

Any advice would be greatly appreciated. Cheers.

Title: Re: Jacuzzi fl1 error
Post by: Jacuzzi Jim on January 14, 2017, 11:01:07 pm

 Most likely a bad circulating pump.