Hot Tub Forum

Original => Hot Tub Forum => Topic started by: Yama on December 25, 2016, 06:11:35 pm

Title: New hot tub board installation
Post by: Yama on December 25, 2016, 06:11:35 pm

Hey guys,

Pulled out the burnt balboa board and labeled all the wires with masking tape, trying to install the new board everything went well except the tape fell off from the Hot Red and Hot Black wires now I am not sure which one goes to red or which one goes to black.

I Will Really Appreciate Any Input.

Thanks.

Title: Re: New hot tub board installation
Post by: Dr. Spa™ Ret. on December 26, 2016, 09:43:44 am

Shouldn't matter.

Title: Re: New hot tub board installation
Post by: Yama on December 26, 2016, 09:51:27 am

Thanks so much for your reply, I am at work now but in the next 2 days I will install the board and post the results.

Title: Re: New hot tub board installation
Post by: JacuzziJack on December 26, 2016, 11:06:03 am

Try this (otherwise, there are a bunch of pictures on the net, just type in an image search):

http://s3.amazonaws.com/f01.justanswer.com/JACUSTOMERi52obemr/2013-11-09_223046_photo_1.jpg (http://s3.amazonaws.com/f01.justanswer.com/JACUSTOMERi52obemr/2013-11-09_223046_photo_1.jpg)

Title: Re: New hot tub board installation
Post by: Yama on January 05, 2017, 02:34:25 pm

Hey guys,
Just finished installing a new board and a new heater everything worked perfect.

Thanks alot guys for your information.