Hot Tub Forum

Original => Hot Tub Forum => Topic started by: Blade-Master on July 28, 2004, 12:05:17 am

Title: Replacement filters for Beachcomber 750
Post by: Blade-Master on July 28, 2004, 12:05:17 am

Anybody know what the Pleatco or Unicel number is for a replacement filter on a Beachcomber 750 spa? I've seen some filters that look like a size match but they have a 50 square foot filtering surface as opposed to the 25 square foot filtering surface my current one has listed. Is the 50 square foot filter more effective (seems logical)?

Title: Re: Replacement filters for Beachcomber 750
Post by: IonHeaven on July 28, 2004, 02:40:04 am

Sorry I don't know anything about the filters, but am considering the 750. Nice tub! Any advice for a new buyer?

Title: Re: Replacement filters for Beachcomber 750
Post by: Steve on July 28, 2004, 02:55:58 am

The 25 ft is 4625 if my memory serves me right. The 50 sq ft is 4950. These are unicel numbers.

I always like a good 25 opposed to the 50. It filters well and is easier to clean. There is usually 2 different quality pleats in a 25 sq ft and the cheap ones aren't great. Look for about a $35.00 CAN price for a good 25.

Steve

Title: Re: Replacement filters for Beachcomber 750
Post by: OnMedic on July 28, 2004, 08:06:23 am

Are these much better then the ones I would buy from my dealer? What is the difference?

Thanks

Title: Re: Replacement filters for Beachcomber 750
Post by: Steve on July 28, 2004, 12:36:36 pm

Your dealer would most likely carry these. If you're purchasing a filter and the packaging at your dealer has a Beachcomber logo, it is the better of the two 25 sq ft filters. I believe they're green plastic on either end of the filter.

Steve