Hot Tub Forum

Original => Hot Tub Forum => Topic started by: castletonia on September 17, 2015, 12:56:41 pm

Title: 2005 Caldera Palomar Measurements
Post by: castletonia on September 17, 2015, 12:56:41 pm

Wondering if any Caldera / Hot Springs guys can help me out.  I have a customer with a 2005 Caldera Palomar and he needs a replacement cover.  Sunstar who I order through does not have the measurements and Watkins will only give the the length and width because it is proprietary ( I'm not a Caldera or Hot Springs dealer).  I need the corner radius and skirt length but the tub is an hour away at a cottage so I cannot just run out there or have the customer go measure. 

Can anyone help me out?

Title: Re: 2005 Caldera Palomar Measurements
Post by: Dr. Spa™ Ret. on September 17, 2015, 01:46:50 pm

I believe;
   

74" x 86" w/6" radius corners

Title: Re: 2005 Caldera Palomar Measurements
Post by: castletonia on September 17, 2015, 02:08:37 pm

That's what I thought when looking online, but Watkins told me 89" x 89", but won't tell me anymore information because I am not a Caldera dealer and not buying the cover from them.

Title: Re: 2005 Caldera Palomar Measurements
Post by: Dr. Spa™ Ret. on September 17, 2015, 02:59:52 pm

I found it online as well...so not really 100% sure.

Title: Re: 2005 Caldera Palomar Measurements
Post by: Hottubguy on September 17, 2015, 07:48:49 pm

Quote from: Dr. Spa™ Ret. on September 17, 2015, 01:46:50 pm

I believe;
   

74" x 86" w/6" radius corners

These are correct I believe also.  I know its 74 x86 just not positive on radius

Title: Re: 2005 Caldera Palomar Measurements
Post by: castletonia on September 17, 2015, 10:59:48 pm

Watkins confirmed that it is 89" x 89" and so does the owners manual.  There must be a different Palomar matching those other measurements because I found that too.  I've been told a 6" radius, but cannot confirm.