Hot Tub Forum
Original => Hot Tub Forum => Topic started by: BrockW on June 29, 2015, 08:25:39 pm
-
I have recently purchased a home with an Emerald Spa. It hasn't been used in a couple years, so I am in the middle of replacing the o-rings on the line from the spa to the pump. I have 2" o-rings that fit perfectly on the male (threaded) end of the pipe, but are just barely too small on the female (non-threaded) end.
Any advice on what o-rings I need to purchase to fit on the female end?
Thanks!