Hot Tub Forum
Original => Hot Tub Forum => Topic started by: theroar84 on May 13, 2015, 09:22:18 pm
-
I know I need I Soverign... I built a deck around the one I have that is a 99... Not real interested in rebuilding the deck... =)
I put a heater in the 99 model, but she is leaking water at about an inch a day somewhere...
I have searched these forums, but most info is from 2006ish... Anyone have an idea what I can expect to spend on a Sovereign II. They are the exact same dimensions, right? I have no wiggle room on the deck unfortunately. Rebuilt that sucker last summer and I am wishing right now I had thought that one through...
Thanks for your time.
Mike
-
Unfortunately I can not answer most of your questions. However, yesterday I went in the local Hot Springs dealer and they were willing to make deals on all 2014 models. If you haven't already been to see your local dealer, that where I would start.
According to the Hot Springs website the measurements on the Sovereign are as follows (not sure what the Sovereign II is):
Dimensions
6'8" x 7'9" x 33"H
2.03m x 2.36m x .84mH
I have only been looking at hot tubs for the past 24 hours so please keep that in mind as I am only trying to help. Best of luck!
-
Thanks for the effort. I ended up deciding to just bite the bullet and snag the tub I wanted. The sovereign here was 9k. I got it lowered a bit because I did not need a step or a cover lift, but after MI tax it was still 9k. Love the tub though. I had one already so I had built my deck around it.... This one fits perfect... otherwise I would have had a deck rebuild.
Thanks again.