Hot Tub Forum

Brand Specific Forums => Jacuzzi Hot Tubs => Topic started by: Whisky Lad on February 12, 2015, 03:38:18 pm

Title: Jacuzzi J230 FL1 message
Post by: Whisky Lad on February 12, 2015, 03:38:18 pm

I have an FL1 error code on my Jacuzzi J230, sometimes it heats then the next day the heater light flicks on then off again whilst the pump is running. I have replaced the filter, tried power off then power back on with the filter out and the jets open but still it does not work properly.

The pump was refurbished a couple of years ago, it seems to be working OK but could it be the source of the problem?

Any suggestions gratefully received  :)

Title: Re: Jacuzzi J230 FL1 message
Post by: Jacuzzi Jim on February 12, 2015, 04:20:33 pm

 Pressure switch.   Easy to replace and doesn't cost that much.    3902 or 3903 is what's in there now I believe.


 https://www.google.com/#q=pressure+switch+hot+tub&tbm=shop