Hot Tub Forum

Original => Hot Tub Forum => Topic started by: leweezo on February 05, 2015, 11:03:32 pm

Title: Jump start
Post by: leweezo on February 05, 2015, 11:03:32 pm

Today we hooked up our new Sundance Edison and after filled, I threw in 3Tbs of Baking soda and 30 minutes later I used the spa frog jump start  shock..  We did a test strip and all is good but the Chlorine and Bromine levels are very high..  I  took out the yellow floater(bromine).. How long do ya think B4 the Chlorine/Bromine levels will lower so we can get into the tub?

thanks
mike

Title: Re: Jump start
Post by: leweezo on February 05, 2015, 11:04:36 pm

if it helps, I am on well water

Title: Re: Jump start
Post by: Tman122 on February 06, 2015, 06:13:44 am

How high is the chlorine bromine?

Title: Re: Jump start
Post by: leweezo on February 06, 2015, 09:08:42 am

On the strip the chlorine is at the highest and this morning the Bro has gone from highest down to the next to highest