Hot Tub Forum

Original => Hot Tub Forum => Topic started by: Schergz on December 06, 2014, 12:36:43 am

Title: NEWBIE Needs Help with Old Sundance Weir Assembly
Post by: Schergz on December 06, 2014, 12:36:43 am

Hi. I 'm new to the forum here and am hoping someone familiar with older Sundance tubs can help me out. I was given a 1990 Sundance Serenna which I have up and running. This is my first hot tub so I don't know much about them. My Question is from most of the pics I've seen of other Sundance tubs they have a removable lid directly over where the filter sits. This model doesn't. Here's some pics. (http://i44.photobucket.com/albums/f35/esmo1222/3a3dcdc3-53cf-4261-8814-f40a53a1eeb6_zps728d8227.jpg) (http://i44.photobucket.com/albums/f35/esmo1222/a56c2063-56a0-462c-984c-3012c664e8cf_zps14c3b308.jpg)
My question is if you look at the second picture you can see a "flapper" like this(http://i44.photobucket.com/albums/f35/esmo1222/23741a0c-7be3-4399-b14f-fb92fcc596a2_zps4c95e672.jpg) and that's all that came with the tub. On this style tub, should it also have this (http://i44.photobucket.com/albums/f35/esmo1222/f1372b60-d3e6-4881-9f4b-b66e040fee4c_zpsd78cfe83.jpg) and are they meant to work together?

Thanks

Title: Re: NEWBIE Needs Help with Old Sundance Weir Assembly
Post by: Kev B on December 07, 2014, 10:47:25 am

 The middle picture is a generic weir gate that I do not believe Sundance ever used. The bottom picture is the good old classic Sundance system. They do not work together

Title: Re: NEWBIE Needs Help with Old Sundance Weir Assembly
Post by: SerjicalStrike on December 08, 2014, 09:11:16 am

The "flapper" picture you posted is the only one your spa needs.  The other weir will not work with your spa.

Title: Re: NEWBIE Needs Help with Old Sundance Weir Assembly
Post by: Schergz on December 12, 2014, 09:33:56 pm

Okay. Thanks for the reply.