Hot Tub Forum
Original => Hot Tub Forum => Topic started by: overlandsea on June 02, 2014, 10:17:23 am
-
I just got a 2005 Winchester Imperial (made by Sundance/Jacuzzi). I was wondering if anyone knows where I can find a diagram for jumper configuration for 30/50 amp configurations. I'm trying to first determine which it is set up for now, and secondly decide if I want/need to change it.
Thanks!
-
A picture of the board might be helpful. Looking in my old tech book jumper 1-2 off enables 50amp jumper 1-2 on or jumped enables 15/30 amp logic. the Winchester mdls were sold through Cosco I believe so not sure if the bard is the same??
-
Hopefully this picture helps. I can zoom in on a certain area if I need to.
(https://www.flickr.com/photos/125120994@N04/14147325527/)
-
Well I never could get the picture to work. However, upon further inspection, I found that the wiring diagram including the jumper configurations was printed on the inside of the cover panel. Jacuzzi Jim had it right on for my spa: 1-2 off=50 amp, on = 30 amp.Thanks for the help!