Hot Tub Forum
Original => Hot Tub Forum => Topic started by: watzup on November 10, 2013, 01:47:54 pm
-
The outside is pretty simple, mild soap/water and a coat of 303. The inside (bottom) grey material, I usually have to scrub it pretty much to keep the black (mold?) under control. Was wondering how others keep the inside clean? Would 303 be ok on the inside after a good cleaning??
-
Don't know about 303 underneath?? I use 303 on top and in 6 yrs have never done anything on the underside of my cover and have never had any mold or anything on it.
-
I too suspect that 303, as great as it is, would leave a residual behind on the inside of the cover that would work its way into the water. I'd never had a mold problem inside the cover, I assume there is enough chlorine gas present to keep it clean, though I try to run the jets awhile before closing it.
-
Get an empty spray bottle and fill it with a 50/50 mixture of distilled white vinegar and water. Works really well and is environmentally friendly.
-
I'll give that a shot. Tx
-
Get an empty spray bottle and fill it with a 50/50 mixture of distilled white vinegar and water. Works really well and is environmentally friendly.
That does sound like a good idea, and the worst case, it may drop his PH a little.