Hot Tub Forum

Original => Hot Tub Forum => Topic started by: mattwelke on July 06, 2013, 04:57:23 pm

Title: The back piece of my jet is stuck in my tub.
Post by: mattwelke on July 06, 2013, 04:57:23 pm

I bought a few replacement jets for my beachcomber to replace a few non performing ones.

I have a beach comber and the jets come out by twisting and pulling them out. But the front cover came off and left the spinny piece where the water comes out and the back end piece. So twisted and pulled more and the spinny piece came out leaving just the long back end piece lodged in the jet hole. I can keep turning it with a screwdriver and can turn the jet on and off but I cant get it out. I even tried prying it out with my screw driver. I dont want to break it further but why cant it come out.

Title: Re: The back piece of my jet is stuck in my tub.
Post by: Jacuzzi Jim on July 06, 2013, 06:29:41 pm

 Needle nose pliers, just try and grab ahold of it, twist and pull.  The jet back itself is pretty hard to break but possible if you really reef on it, but you should only be holding on to the end of the jet.