Hot Tub Forum

Original => Hot Tub Forum => Topic started by: wmccall on May 28, 2004, 01:13:21 pm

Title: Question for Dealers
Post by: wmccall on May 28, 2004, 01:13:21 pm
This is a repeat from the Artesian topic, but I wanted to put in here in case some of you didn't read that thread.

(http://  http://artesianspas.com/images/Platinum_Jets.jpg  )  

To those of you dealers, do you recognize who makes these jets?  I'd love to look at a catalog and see what else is available.  
Title: Re: Question for Dealers
Post by: ZzTop on May 28, 2004, 02:52:45 pm
Bill I am not a dealer but have a look at this link
http://db.waterwayplastics.com/catalogpdf/catalogaccess.html regards Zz
Title: Re: Question for Dealers
Post by: wmccall on May 28, 2004, 03:25:19 pm
Quote
Bill I am not a dealer but have a look at this link
http://db.waterwayplastics.com/catalogpdf/catalogaccess.html regards Zz



Thanks for the link.  Apparently Dynasty uses a lot of Waterways products. I recognized my waterfall there, and read the spec sheet on it and found it has a "replaceable blade" so if the flow gets messed up down the road, I may attempt a repair.

I know my pumps are waterways, so I'll have to look up the model number and see what the HP rating is (Dynasty calls them 7HP, but lets not start that argument  ;D )

AndI did find the jets I was looking for, so thanks, even if your not a dealer, now back to check to see if they sell to the public, or at the very least I can tell my dealer excactly what to order for me.
Title: Re: Question for Dealers
Post by: Gary on May 28, 2004, 06:12:43 pm
Looks like cheap Waterway jets to me. I am constantly replacing Waterway jets for customers. If you do not need I would stay away.

Gary
Title: Re: Question for Dealers
Post by: Steve on May 29, 2004, 12:15:11 am
Gary is correct that Waterways had some issues where jets weren't staying in. They addressed this months ago and now are flawless.

Waterways makes some great therapy jets and I strongly recommend them now. The stainless steel I could do without though... ??? I like the low maintenence of the grey plastic instead.

Steve
Title: Re: Question for Dealers
Post by: ZzTop on May 29, 2004, 05:52:35 pm
Quote


AndI did find the jets I was looking for, so thanks, even if your not a dealer, now back to check to see if they sell to the public, or at the very least I can tell my dealer excactly what to order for me.


Bill here are some net resellers of Waterways products.

Note:  If you are using Waterways products you should be able to use their  hand held jet.

http://www.spanetwork.com/Jets-Waterway_Jets.html

http://www.poolandspa.com/catalog/category000492.cfm

http://www.spadepot.com/warehouse/parts.htm

http://www.hottubessentials.ca/jet_internals.asp

Regards Zz