Hot Tub Forum
Original => Hot Tub Forum => Topic started by: dax on February 03, 2011, 07:22:16 pm
-
Service guy came out a couple weeks ago to replace the circuit board on my Sundance Cameo. As he's putting the panels back on, he tells me that they were reversed - the left panel was on the right, and vice versa.. There was a slight misalingment, but not enough that it bothered me so I didn't worry about it. He put the panels on the correct way and it lines up much better. However, now the locks for the straps are not aligned so I can't lock down the cover. Usually don't lock down the part of the cover near the control panel, but I wanted to last night due to the high winds.
I can move them, but then I'll have a few small holes in the panels. Or I can get another set of the locks and install them in the right positions. Anyone care to chime in on what he/she would do?
BTW, the dealer's guys set up the spa, attached the cover mate, and installed the locks in the first place. Maybe he'll give me the locks free.