Hot Tub Forum

Original => Hot Tub Forum => Topic started by: cedar tub on November 18, 2008, 04:13:44 pm

Title: Taylor replacement reagents
Post by: cedar tub on November 18, 2008, 04:13:44 pm

Hello Lads,
I have a Taylor K2006 kit and use my pH reagents more than any other.  I use Nature 2 and an electronic copper ionizer along with 0.5-1.0 ppm dichlor for sanitation.  When I check my chlorine, I typically grab a test strip and I have found them to be pretty accurate for this test.

My question:
Where is the best place to buy replacement reagents for the K2006 (specifically pH)?  I bought my original kit from rhtubs.com, but I don't see replacement reagents on their site.

Title: Re: Taylor replacement reagents
Post by: Dr. Spa™ Ret. on November 18, 2008, 05:09:24 pm

The reagents are here;


http://www.rhtubs.com/store/taylor-refill.htm

Title: Re: Taylor replacement reagents
Post by: cedar tub on November 18, 2008, 08:04:27 pm

Thanks!