Hot Tub Forum

Original => Hot Tub Forum => Topic started by: Memories_Galore on November 12, 2008, 07:05:01 pm

Title: water hardness
Post by: Memories_Galore on November 12, 2008, 07:05:01 pm

water hardness is my problem.  I added too much chemicals to bring it up, now I think it's too high.  It is at 600.  What can I do exept to drain some water and add plain water?  Any help, please.

Thanks in advance.
  

Title: Re: water hardness
Post by: Jacuzzi Jim on November 12, 2008, 07:59:23 pm

You can drain some water out and refill.  ;)    You would probably be ok with it if you wanted to leave it and just use the tub refill as needed its up to you.  

Title: Re: water hardness
Post by: Memories_Galore on November 13, 2008, 11:36:09 am

Thanks for the info.  I think I will take your advice and just refill as needed.

Title: Re: water hardness
Post by: tony on November 13, 2008, 12:34:33 pm

If you leave as is, be sure your pH does not get above acceptable levels as scaling can occur.

Title: Re: water hardness
Post by: Memories_Galore on November 13, 2008, 07:13:53 pm

thanks for telling me about the PH level.  It's good for now, I will keep checking it.