Hot Tub Forum

Original => Hot Tub Forum => Topic started by: 00limited7 on December 04, 2009, 10:38:48 am

Title: HS 2000 Classic Jet Pump rebuild
Post by: 00limited7 on December 04, 2009, 10:38:48 am
I've got a drip coming from my Jet pump. With the jets off it drips about 1 to 2 drips per minute. I haven't look at it with the jets on but I notice water on the deck in this area. So I'm assuming that it is worse with the jets on. So I've got a couple of questions.

1.) How hard is it to rebuild this pump? (I see that I'm going to have to remove the control box to get to the pump.)
2.) Do you think this jet pump will last until say March? (don't want to drain the tub and start working on it till spring)

Any answers are greatly appreciated.

Thanks,
Roger