Hot Tub Forum

Brand Specific Forums => Marquis Hot Tubs => Topic started by: bcrobbins on December 15, 2010, 07:01:58 pm

Title: marquis spa temp
Post by: bcrobbins on December 15, 2010, 07:01:58 pm

Just got a marquis spirit ls spa when I set it at the highest temp (104) its not hot enough for me is their something  to change to make it go hotter my old tub I set at 106.Tub is 2or 3 years old but new as it was setting on the dealers floor.Thanks

Title: Re: marquis spa temp
Post by: ejf The Spa Guy on December 16, 2010, 12:14:35 pm

the temps are all set for a max of 104 degrees now....

Title: Re: marquis spa temp
Post by: hottubdan on December 17, 2010, 12:07:53 am

Hot Spring go to 106.  There may be something dealer can do to reset/bypass max temp.

Title: Re: marquis spa temp
Post by: stuart on December 20, 2010, 02:13:41 pm

bc,
My best guess is that you're running that on 110v in which case you're dealing with a smaller body of water that shuts the heater off when you turn the jets on high. This being the case your cooling the water with the jets and with your body temp taking up a large amount of the volume.

I suggest running 220...If you're on 220 and still dropping below 103 when you turn the jets on then you might have the pin for 30/50 amp set wrong...