Hot Tub Forum

Original => Hot Tub Forum => Topic started by: Snowjob on October 08, 2017, 08:38:22 am

Title: J470 - which filter is for the circulation pump?
Post by: Snowjob on October 08, 2017, 08:38:22 am

Preparing for our new 470 that is supposed to arrive in a few days, instructions say "Place Nature2 Spa Stick inside the filter on the circulation pump side"  There are 2 large cylindrical filters, which one of them is the circulation pump side?

thanks

Title: Re: J470 - which filter is for the circulation pump?
Post by: Jacuzzi Jim on October 08, 2017, 09:01:00 am

Unless they have changed it?  When you remove the filters, it will be the side with a screen or grate like thing.  The other will just be an open hole where the filter screws into it.

Title: Re: J470 - which filter is for the circulation pump?
Post by: Snowjob on October 08, 2017, 09:05:15 am

thanks for the quick response!

Title: Re: J470 - which filter is for the circulation pump?
Post by: bradleyabell on October 09, 2017, 07:18:53 am

Does this apply to any spa?  I have a bullfrog X8L and my tub also has 2 filters...Not sure if one or both are for the circ pump.

Title: Re: J470 - which filter is for the circulation pump?
Post by: Jacuzzi Jim on October 09, 2017, 09:39:42 am

 On the BFX I think it's the filter to the right?  Circ pump or not?  You can just remove a filter and see which one has suction.. 

Title: Re: J470 - which filter is for the circulation pump?
Post by: blakeonline on October 12, 2017, 11:39:26 am

The 2 part one is the circulation pump on my 2013  J-480. A small pleated filter and a small non pleated one....to my understanding.

https://youtu.be/9jeuD0Jgy0E

look for the one with the Nature2 stick......