Hot Tub Forum
Original => Hot Tub Forum => Topic started by: nicker22 on April 22, 2014, 11:51:09 am
-
hi there, I was wondering if anyone could tell me what is involved in replacing a return flow sensor. I have a line on a 2004 Beachcomber 580 tub that I can get a super deal on. The tub needs a few jets replaced and the flow valve replaced. The physically shape is amazing, was located under a covered area so the cabinet stairs are in excelent shape as is the shell.
thanks in advance.
-
It's probably pretty standard, and easy to change out, but you need to find out if it's a pressure switch or a flow switch.
Do you know if it has the small circulating pump or just uses the main 2 spd pump. I don't know Beachcomber all that well maybe Tman or others will chime in..
-
In 04 I think they used what they called the hush pump for circulation. A bit bigger than a standard circ pump. Fed more jets. Could be simple if it's just the flow sensor. Located just down stream from the heater. Where's our Beach guy? Been a while since I seen one. They have a beach repair guy around here pretty much covers all of them.