General > General info Somewhat hot tub related

Don't do it yourself project.

<< < (2/2)

drewstar:

--- Quote ---I put down the first floor on top of luan underlayment. It is NOT coming up..believe me I tired. It wasn't worth the fight. Even if I got the vinyl up, I would have to remove the adhesive...with nasty chemicals.  I am thinking of a great invention...this leveling stuff in colors, just slosh it on and you have a new floor... :o ;D ;D
--- End quote ---


At this rate bonnie, by the time you get down leveling the floor, you wont be able to stand up in the room. it will be 3 feet shorter.    ;D

My dad used the stuff once and he just skimmed it on easy-japenesey.   ??

Luan is great, but can screw up you baseboard and jams.  ;)

anne:
I have been doing uber amounts of research lately for my upcoming kitchen remodel, and I just started looking into floors. I may be wrong here, but I thought that that levelling stuff would not adhere well to an existing vinyl floor, and that it should be put down only onto the cement or subfloor once the old vinyl is up......I could be totally wrong.....

Bonibelle:
Anne, there are two types of leveling compounds. One is to fill and level the subfloor. The other is made to level the embossing of vinyl so that you don't have to remove it. It has a portland cement base, and an additive (smells like ammonia)that makes it stick really well.  Hopefully, after all of this, it won't come up..I am going to lay the floor today..we'll see. :-/

autoplay:

--- Quote ---I have been doing uber amounts of research lately for my upcoming kitchen remodel, and I just started looking into floors. I may be wrong here, but I thought that that levelling stuff would not adhere well to an existing vinyl floor, and that it should be put down only onto the cement or subfloor once the old vinyl is up......I could be totally wrong.....
--- End quote ---

I do strictly Tile and Stone,and don't touch the other areas as far as floors.

It's extremely important to have a good bond,and from the sounds of it,you're using an acrylic additive in the self leveling compound.  After it has dried,you can tap on it,and listen for "hollow" spots. If it sounds solid,you're good to go! Only exception to that is,the deflection of the subfloor underneath. That's a variable too,which I can't help ya with without looking at it.

On a side note,I NEVER go over vinyl,I prefer to pull/strip it,as it's peace of mind for me,when I sleep at night. 99% of my work is new homes,so I rarely/never deal with it.  Others will tell ya it's ok to go over vinyl,and make bonding products for such. I personally prefer not to.

Bonibelle:
OK, Auto, I bounced up and down all over my embossing stuff...it is solid as a rock. I will just hope with all that adhesive goop, it will keep it stable. Wish I could do tile in there, but right now it doesn't fit in the budget and I have NO experience with that...and I can't handle the backer board or cut it... just too old, too weak!   :-/

Navigation

[0] Message Index

[*] Previous page