Original > Hot Tub Forum

No Power To Hot Tub

<< < (2/2)

CanadianSpaTech:
Yes there is a jumper from Red AC up to White AC as needed so you are good there. The ozone you would need to move the white wire at W2 from where it is currently connected to red AC up to White AC just below the 30 amp fuse where there are currently 2 white wires connected. Just connect it to one of the remaining male tabs.

DanglaGT:
Thanks for all of your help! I'm back up and running and saved some money in not needing someone to come service it.

Hopefully, the tub is more reliable now that it should be configured properly.

Navigation

[0] Message Index

[*] Previous page