What's the Best Hot Tub

Author Topic: limelight 220 conversion  (Read 1642 times)

brianls72

  • Junior Member
  • *
  • Posts: 2
limelight 220 conversion
« on: October 29, 2021, 09:23:58 pm »
Just converted my Limelight Beam from 110 to 220. Had an electrician do all the wiring. Heater works and jets work, just not together. The jumper on the terminal block was repositioned correctly  Read something in the manual about soft jumpers being programed. Are those in the control box or is it done on the topside screen? Is it something I can do or only a dealer?

Thanks

Hot Tub Forum

limelight 220 conversion
« on: October 29, 2021, 09:23:58 pm »

Hottubguy

  • Ultimate Member
  • *****
  • Posts: 2150
Re: limelight 220 conversion
« Reply #1 on: October 31, 2021, 09:29:46 pm »
You need to go in service mode and adjust the jumper to convert the heater to 220 V. To get In service mode on the PC board there is a little black button that looks about the size of a pencil eraser. Push that. That gets you in service mode. Adjust proper soft jumper and you should be good to go

brianls72

  • Junior Member
  • *
  • Posts: 2
Re: limelight 220 conversion
« Reply #2 on: November 02, 2021, 09:39:53 am »
Thanks, that did the trick

Hot Tub Forum

Re: limelight 220 conversion
« Reply #2 on: November 02, 2021, 09:39:53 am »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42