What's the Best Hot Tub

Author Topic: Gullible Guy is Gullible (or How I Deluded Myself on an On-Time HT Delivery)  (Read 8500 times)

cranbiz

  • Full Member
  • ***
  • Posts: 241
The tub will perform a GFCI test within the first week to which it will simulate a ground fault and the breaker should kill power to the tub. Mine was in the first day or so.

You can test it yourself from the settings menu. The breaker needs to trip for either the automatic test or the manual test. If it doesn't trip, the test failed. That usually means the GFCI install is wrong.

I would run the manual test. If it fails again, call your electrician to double check the install.

Hot Tub Forum


Sam

  • Senior Member
  • ****
  • Posts: 1332
This is most likely an electrical wiring problem.  Call your electrician.  I usually has to do with the neutral being connected wrong.

Hot Tub Forum


 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42