Original > Hot Tub Forum

Is it wise to add a shut off valve?

<< < (2/2)

brownnugen:
Here are pictures of my Tidalfit configurations:
Circulation pump (with 1 Gate Valve):


The jet pump for the 2 upper jets:


I have a clear view between the area after the pump and where the swim jets and I can confirm there are no Gate valves after the pump.  In the picture (before the pump), I also don't see a Gate valve; would they have installed on closer toward the circulation pump?   

CanadianSpaTech:
no pics

brownnugen:

--- Quote from: CanadianSpaTech on April 18, 2021, 01:54:59 pm ---no pics

--- End quote ---

Here is a link to the pictures:  https://imgur.com/a/UhZqmVj

CanadianSpaTech:
In the first photo the gap in between the pump unions and the elbows at the face of the pump and on the side of the pump is where there should be gate valves but looks like they cheeped out. In the second photo there should be a gate valve to the right of the blue Neo Spa pack.
To add a gate valve to the first photo you will need a 2" pump Union, S X SPG Gate Valve, 2" pipe coupler, 1' of 2" ridged pipe, glue. Pretty tight fit to get it all in there and connected together. Not going to be easy if you haven't done it before. 

Navigation

[0] Message Index

[*] Previous page