What's the Best Hot Tub

Author Topic: FL 1, New Owner  (Read 2777 times)

stpatty

  • Junior Member
  • *
  • Posts: 2
FL 1, New Owner
« on: January 03, 2021, 04:52:10 pm »
Hello, I am new to owning a hot tub...we bought a house with a Sundance 680 series about 2 months ago.  Just a few days ago, I received an fl 1 error code.  Neither pump will run, light won't turn on, fuse checks good, and I have reset the breaker.  I also disconnected the flow switch pins from the control board and just tried resetting everything.  Also, I removed the filter and nothing changes.  My question is, what should I do to get my pumps and heater running from here?  My concern is that here in NW Montana, it's getting pretty consistently cold and I am a bit worried about freezing since it is an outdoor tub.  If there is any other troubleshooting/information I can collect to help solve the problem, it would be much appreciated.
« Last Edit: January 10, 2021, 09:48:59 pm by stpatty »

Hot Tub Forum

FL 1, New Owner
« on: January 03, 2021, 04:52:10 pm »

stpatty

  • Junior Member
  • *
  • Posts: 2
Re: FL 1, New Owner
« Reply #1 on: January 25, 2021, 04:20:38 pm »
Anybody got any ideas?

Hot Tub Forum

Re: FL 1, New Owner
« Reply #1 on: January 25, 2021, 04:20:38 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42