Brand Specific Forums > Bullfrog Spas

Cover Lift for Bullfrog A series

(1/1)

kennethogden:
Looking for suggestions for what people like in their cover lift.

I'm getting a Bullfrog A7 shortly, which will be sunken into the deck area.  It is about 18 inches above the deck level, and the outside section will have 10-12 inches between the side and the to-be built railing.

The control panel side will be on the outside section which is where I want to place the cover when the tub is in use.  My concern has been around my head being close to the clover when it's in the open position.  Most seem to lean into the tub area and would hit your head when leaning back.(slouching in tub). 

I'm replacing a Jacuzzi Santina with dual loungers and I'm on the tall side being 6'3.  Often my head was tilting to the outside.  Of course no loungers in the A7,  just upright seating.

Appreciate any help,
Ken

BW13:
most bullfrog dealers include a free cover and lift

Frogger:
A little off topic but I'm surprised you didn't go with a A8 (series) spa considering your height. The "8 series" are significantly wider and deeper.

Hottubguy:

--- Quote from: BW13 on August 28, 2020, 05:25:21 pm ---most bullfrog dealers include a free cover and lift

--- End quote ---

 Nothing is free.......Gets built into price. Diffferent cover
Lifters cost different amounts of money and the same goes for steps

Navigation

[0] Message Index