What's the Best Hot Tub

Author Topic: PUMP WONT STAY ON  (Read 3232 times)

RORER7114

  • Junior Member
  • *
  • Posts: 13
PUMP WONT STAY ON
« on: March 18, 2020, 07:30:29 pm »
Hi I have a sundance spa marin 32 1992 I have run into a problem the spa pump wont stay on changed all the fuses turns on for about 2 seconds then turns off please help also the circulation pump is not working the heater light are not on as well thanks

Hot Tub Forum

PUMP WONT STAY ON
« on: March 18, 2020, 07:30:29 pm »

Tman122

  • Ultimate Member
  • *****
  • Posts: 4424
  • If it Ain't Broke
Re: PUMP WONT STAY ON
« Reply #1 on: March 19, 2020, 08:16:30 am »
Hi I have a sundance spa marin 32 1992 I have run into a problem the spa pump wont stay on changed all the fuses turns on for about 2 seconds then turns off please help also the circulation pump is not working the heater light are not on as well thanks

If the circ pump isn't working the heater won't work, they only work in conjunction. The jet pump is a different problem. Start with circ pump, how old is the pump?
Retired

CanadianSpaTech

  • Full Member
  • ***
  • Posts: 304
Re: PUMP WONT STAY ON
« Reply #2 on: March 19, 2020, 09:32:29 am »
1992...WOW

RORER7114

  • Junior Member
  • *
  • Posts: 13
Re: PUMP WONT STAY ON
« Reply #3 on: March 20, 2020, 02:16:55 am »
the pump is about five years old

Tman122

  • Ultimate Member
  • *****
  • Posts: 4424
  • If it Ain't Broke
Re: PUMP WONT STAY ON
« Reply #4 on: March 20, 2020, 08:21:02 am »
the pump is about five years old

That seems like a bit of a short life span for a circulation pump, has the tub been wet and turned on for all of those 5 years until recently?
Retired

RORER7114

  • Junior Member
  • *
  • Posts: 13
Re: PUMP WONT STAY ON
« Reply #5 on: March 20, 2020, 11:05:39 am »
yes

Tman122

  • Ultimate Member
  • *****
  • Posts: 4424
  • If it Ain't Broke
Re: PUMP WONT STAY ON
« Reply #6 on: March 20, 2020, 02:30:23 pm »
Filter clean and regularly replaced?
Retired

RORER7114

  • Junior Member
  • *
  • Posts: 13
Re: PUMP WONT STAY ON
« Reply #7 on: March 20, 2020, 07:28:36 pm »
yes

Tman122

  • Ultimate Member
  • *****
  • Posts: 4424
  • If it Ain't Broke
Re: PUMP WONT STAY ON
« Reply #8 on: March 20, 2020, 07:39:15 pm »
yes

Well maybe your board is bad. But a tech may carry a replacement circ pump to test the system board. Unplug the circ pump and heater and see if the jet pump works.

Do you know how to properly power down your tub?
Retired

RORER7114

  • Junior Member
  • *
  • Posts: 13
Re: PUMP WONT STAY ON
« Reply #9 on: March 21, 2020, 03:12:25 am »
ok I will try that in the morning thank you

RORER7114

  • Junior Member
  • *
  • Posts: 13
Re: PUMP WONT STAY ON
« Reply #10 on: March 21, 2020, 03:14:51 am »
not sure how to properly shut it down

Tman122

  • Ultimate Member
  • *****
  • Posts: 4424
  • If it Ain't Broke
Re: PUMP WONT STAY ON
« Reply #11 on: March 21, 2020, 08:16:28 am »
not sure how to properly shut it down

At the breaker.
Retired

CanadianSpaTech

  • Full Member
  • ***
  • Posts: 304
Re: PUMP WONT STAY ON
« Reply #12 on: March 21, 2020, 10:01:34 am »
not sure how to properly shut it down

If this is the case call for service

RORER7114

  • Junior Member
  • *
  • Posts: 13
Re: PUMP WONT STAY ON
« Reply #13 on: March 21, 2020, 02:29:59 pm »
I know how to do it at the breaker I just thought you had some sort of special way to shut down

Hot Tub Forum

Re: PUMP WONT STAY ON
« Reply #13 on: March 21, 2020, 02:29:59 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42