Dim Hot Springs Exterior Logo Light?

[d00nut]

Hold the back button for 3 seconds

[bud16415]

Hold the back button for 3 seconds

  thanks!!!!

[d00nut]

 

[JB0113]

Any other relatively “hidden” or probably more appropriately, not obvious features or settings you can think of off the top of your head, d00nut?  I did find the reverse display via holding back button in the manual when I first read it which was nice to know. Just curious if you had any other tips for convenience/features accessible through main touchscreen control or the system control board underneath the front panel.  I know this is somewhat off topic from my original question but just thought I’d ask since you were so helpful with this.

[d00nut]

Can't really think of any other than temperature override.  It's not really in the owners manual.  But you can get your hot tub up to 106.

So, when adjusting your temperature, you'll notice that you can keep clicking/tapping the temp up button till it gets to 104.  Once at 104, just hold the temperature up button and after about 3 seconds, it should turn red and go to 105.  Repeat to get up to 106.

I like my spa hot.  It's at 105 now