Original > Hot Tub Forum

Foam/scum issue

(1/2) > >>

bradleyabell:
Ok guys. I’ve had my tub for 2 years now and consider
Myself somewhat of a hot tub expert at this point.

I just drained my tub and refilled it and have used bright and clear and scale preventer. My water is crystal clear.  My ph and alkaline are right on point and I even just super shocked to eliminate any leftover gunk in the water. 

As soon as I turn the jets on, not immediately, but within 15 seconds foam starts to accumulate. Most of it is just regular bubble looking foam that goes away after jets go off after a while, but there is still a lot of scum that’s visible.

Any tips for how to fix this??

Ralith:
Have you tired anti foaming agent?

https://www.amazon.com/gp/aw/d/B00PZZFTXS/ref=ox_sc_act_image_1?smid=ALVH0CYWPBFNA&psc=1

bradleyabell:
Yes of course. That is more of a cover up though and  only temporarily gets rid of my issue

bradleyabell:
Just brought a water sample in to my local dealer and he said everything (bromine, ph, alk, hardness) are all right in line. He suggested some enzyme, so I’m going to try that and see if that helps over the next few days.

ApresSkiSpa:
Sounds like a biofilm issue.  I noticed the same bubbles with some yellow-brownish scum collecting at the water line under the pillows. It took two successive flushes and didn’t notice any foam or scum after that.

Navigation

[0] Message Index

[#] Next page