What's the Best Hot Tub

Author Topic: Caldera Error Code  (Read 220 times)

huongtranbong

  • Junior Member
  • *
  • Posts: 1
Caldera Error Code
« on: January 09, 2019, 08:25:00 pm »
2016 caldera vanto

So yesterday, as I am still trying to troubleshoot my GFCI tripping problem, I pulled the board out to inspect it.  Board looked fine so I put it back in, attached all wires, and ensured the setup was correct (software jumpers).  Fired it it, and all worked.

Today I went out to check on it.  Pump 1 low speed works, but when i push pump 1 high speed I get a ===== code with READY and JETS flashing and the pump cuts off.  When i push Jets again, pump 2 comes on just as it should.  Therefore, pump 1 high speed is the only thing not working (not even a year since this).  This happened previously and the pump was replaced under warranty.  The manual says the code means the pressure switch is open.  Why would this happen all of a sudden?  Or is there another meaning to the code

Hot tub is at the correct temperature..


Also - does ANYONE have any service manual information on these tubs.  There is literally nothing on the internet. I cant stand not being able to troubleshoot or know what the jumpers mean, etc.

Hot Tub Forum

Caldera Error Code
« on: January 09, 2019, 08:25:00 pm »

wmccall

  • Global Moderator
  • Mentor Level Member
  • *****
  • Posts: 7359
Re: Caldera Error Code
« Reply #1 on: January 10, 2019, 09:32:54 am »
Welcome to the forum!  I just wanted to say that till one our Caldera experts come along.

Hottubguy

  • Senior Member
  • ****
  • Posts: 1684
Re: Caldera Error Code
« Reply #2 on: January 10, 2019, 02:02:58 pm »
When the second pump comes on is the first pump coming on too or staying off?

castletonia

  • Full Member
  • ***
  • Posts: 526
Re: Caldera Error Code
« Reply #3 on: January 10, 2019, 03:05:47 pm »
Is the water level high enough and is the filter clean? 

gmdodt

  • Full Member
  • ***
  • Posts: 135
Re: Caldera Error Code
« Reply #4 on: January 13, 2019, 11:38:00 am »
This is word for word  my post from a while ago. This may be a fake/spam account..

Hot Tub Forum

Re: Caldera Error Code
« Reply #4 on: January 13, 2019, 11:38:00 am »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2019, Whats The Best, Inc. All rights reserved. Site by Take 42