Original > Hot Tub Forum
BFA8 / Euphoria / Pelican Bay
Sam:
--- Quote from: jjackkrash on August 13, 2018, 02:26:01 pm ---It looks like the Bullfrog shell is not self-supporting and is supported by the frame structure, which I have read is not desirable. Is this a real issue given the lifetime warranty on the structure?
--- End quote ---
It's b.s. Bullfrog's shell design is perfectly fine and will very likely not be the reason you replace it many years down the road. There are a variety of ways to build a shell and when done properly, any of them will last decades.
jjackkrash:
Its interesting to me that the A8 has only 10 gallons less capacity than the Pelican Bay; the Marquis is smaller by 140 gallons.
d00nut:
--- Quote from: jjackkrash on August 13, 2018, 11:11:51 pm ---Its interesting to me that the A8 has only 10 gallons less capacity than the Pelican Bay; the Marquis is smaller by 140 gallons.
--- End quote ---
I'm fairly convinced that no manufacturers know how to measure how many gallons actually go into the hot tub. They seem all over the place.
That being said. Go with how big it feels on the inside. A lot of gallons can still feel small.
jjackkrash:
It seems like they'd need to get the gallons right to get the weight right, which is important if the tub is going on a roof or on a deck, for example.
Spatech_tuo:
--- Quote from: d00nut on August 14, 2018, 01:15:25 am ---
--- Quote from: jjackkrash on August 13, 2018, 11:11:51 pm ---Its interesting to me that the A8 has only 10 gallons less capacity than the Pelican Bay; the Marquis is smaller by 140 gallons.
--- End quote ---
I'm fairly convinced that no manufacturers know how to measure how many gallons actually go into the hot tub. They seem all over the place.
That being said. Go with how big it feels on the inside. A lot of gallons can still feel small.
--- End quote ---
Its measured by the same group in the company that decides how many people can fit in the spa.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version