Original > Hot Tub Forum

What do I do after seeing OH

<< < (3/3)

Tman122:

--- Quote from: b_Rennan06 on June 26, 2018, 11:23:57 am ---Don’t really have a local tech. I’ve called a few different places and didn’t have any luck. Therefore I guess I kinda have to be handy. I do believe the pump is older than 6-8 years.

--- End quote ---

Because I am not familiar with the brand, is there more than one pump? You say it's a spa bath, so you drain it after you use it? Is the plumbing original? Is it possible it has been modified and not priming properly?

b_Rennan06:
It says jacuzzi whirlpool spa bath on the tag. It’s an outdoor spa. I do not drain it after every use. I purchased it a couple months ago. Filled it up with water. It worked good for a bit then one day I went out after the automatic run cycle and that’s when it stated OH on the screen. I then took some of the water out and put in cold to cool it down. The temp dropped but quickly raised back up to 109 degrees. And that’s when the jets shut off. Actually everything shut off then. Only the spa light comes on now. The water is now cooled down. It’s actually cold. But I still can’t get the heater or the jets to turn on.

Navigation

[0] Message Index

[*] Previous page