Original > Hot Tub Forum
Retrofit resurrection hot springs tub
Dougstermd:
Hot tub born around 2000. Definitely needs heater thinking heater / new controls it has the low flow heater pump. Apears it could accept a flow through heater? Has pump. Blower and ozonater, and low flow pump. Best retrofit kit?
d00nut:
Umm... So it needs everything? That sucks!
If it's a 2000, you can still get everything you would ever need. You wouldn't want a flowthru heater, get the OEM heater.
Hot Springs never used blowers, so I am not sure what you are talking about there.
Dougstermd:
It looks an awful lot like a blower to me. I don’t think I need to replace any of the pumps I plan to hook it up with a heater bypass hose to test the pumps. Then order a new heater. I was just curious about the retrofit controllers heater packs.
Spatech_tuo:
Look inside the equipment area for the alpha-numeric serial number. Post it here and someone can probably tell you specifically what you have if its a common spa maker.
Dougstermd:
--- Quote from: Dougstermd on May 22, 2018, 02:12:35 pm ---It looks an awful lot like a blower to me. I don’t think I need to replace any of the pumps I plan to hook it up with a heater bypass hose to test the pumps. Then order a new heater. I was just curious about the retrofit controllers heater packs.
--- End quote ---
You are correct sir I saw the corrugated hose from the second pump and made an assumption. My bad. Again thanks for your input.
Navigation
[0] Message Index
[#] Next page
Go to full version