Brand Specific Forums > Jacuzzi Hot Tubs

3 Year old Jacuzzi J325 waterfall issues.

<< < (2/2)

Tman122:

--- Quote from: Jacuzzi Jim on August 12, 2017, 11:53:01 am --- They really are not fixable, you will have to order a new one.   To remove it, take off the back panel.  Then reach up under the shell below the WF and unhook the 3/4" line running to it.   I use to just cut the line and splice a new line in if that makes sense?  Then unscrew the nut holding the WF in place.  Then reverse the steps when putting the new one back in.   You will also have to unplug the light ribbon as well.    It's not a hard job, just a PIA if you have never done it. 

  Does it look like this one?

 https://www.spastore.com/jacuzzi-j-300-series-waterfall-kit-6560-125-replaced-6560-130-2540-904-2007-2015/?utm_medium=googleshopping&utm_source=bc&gclid=EAIaIQobChMI4LH6lobS1QIVAWZ-Ch3srQjSEAQYBCABEgIx7fD_BwE

--- End quote ---

This is right on. I used to just cut the line also and splice in a new piece. It's easier. Ain't done one in like 10 years though. Do it during a drain and refill.

Navigation

[0] Message Index

[*] Previous page