Once again, I have to question the information (or lack thereof) I've received from both my Bullfrog dealer and their contracted repair company. My 2016 Bullfrog R6 spa has a dealer installed JED 203 Ozonator, which was just replaced under warranty. The repair technician mentioned something about the Venturi that the Ozonator is connected to. In doing some research, I've discovered that the JED 203 has an internal electric pump to inject the Ozone into the spa. This statement is directly taken from the
JED 203 Installation Instructions:
"For all models, excluding the JED 203 & 603, suction is required to get ozone into the water." This clearly indicates that a Venturi is
not used with the JED 203, as the Ozone is injected by way of an internal electric pump. I have to question whether this system is installed correctly. If there is in fact a Venturi installed, it appears there should not be.
Also, the JED 203 documentation makes several references to operating the Ozonator (ie; switching it On and Off). The unit is installed under the front apron of my Bullfrog R6. It has no independent, accessible control switch. It appears the control panel on the the "A" model Bullfrog Spas has an "Ozone" selection. For the "X" models, the Bullfrog Owners manual states,
"Ozone Purifier: The optional ozone purifier runs during filter cycles and whenever the spa is heating." Nowhere in the 2016 Bullfrog owners manual is there any mention of when the Ozonator will operate on the R model or how to control it. I can only
assume it functions automatically during filter and heating cycles as it does on the "X" Bullfrog models?
Any comments?
FL Person